Faculty

Dr. Kiran Shahapurkar
Assistant Professor and Research Faculty
Alliance School of Applied Engineering
Dr. Kiran Shahapurkar is a Postdoctoral Researcher at the University of Malaya, Malaysia. He has earned a PhD from the National Institute of Technology, Surathkal, India. He has conducted comprehensive research in the domains of syntactic foams, polymer-based fiber-reinforced composites, and 3D printing. He is recognised as a Top 2% Scientist by Elsevier for 2024.
2024
- Manzoore Elahi Soudagar, Sagar Shelare, Deepali Marghade, Pramod Belkhode, Mohammad Nur-E-Alam, Tiong Kiong, S Ramesh, Armin Rajabi, Harish Venu, T. M. Yunus Khan, MA Mujtaba, Kiran Shahapurkar, MA Kalam, IMR Fattah (2024) "Optimizing IC engine efficiency: A comprehensive review on biodiesel, nanofluid, and the role of artificial intelligence and machine learning." Energy Conversion and Management, 307 (2024): 118337, Elsevier. DOI: https://doi.org/10.1016/j.enconman.2024.118337 (WEB OF SCIENCE Indexed, 2023 impact factor 9.9, Q1)
- Laxmikant D Jathar, Keval Nikam, Umesh V Awasarmol, Raviraj Gurav, Jitendra D Patil, Kiran Shahapurkar, Manzoore Elahi M Soudagar, TM Yunus Khan, MA Kalam, Anna Hnydiuk-Stefan, Ali Etem Gürel, Anh Tuan Hoang, Ümit A?bulut (2024) “A comprehensive analysis of the emerging modern trends in research on photovoltaic systems and desalination in the era of artificial intelligence and machine learning”, Heliyon, 10, e25407 https://doi.org/10.1016/j.heliyon.2024.e25407 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.4, Q1)
- Kiran Shahapurkar , Mohamed Yassin, Venkatesh Chenrayan, Fadi Althoey, Yasin Onuralp Ozkilic, Vineet Tirth, Ali Algahtani, Tawfiq Al-Mughanam, and Abdulaziz H. Alghtanih (2024) “Impact and Compression Behavior of Habesha Moringa/Bamboo Fiber Reinforced Epoxy Composites”, Journal of Natural Fibers, 21(1), 2311301 https://doi.org/10.1080/15440478.2024.2311301 (WEB OF SCIENCE Indexed, 2023 Impact Factor 2.9, Q1)
- Kiran Shahapurkar, Gezahgn Gebremaryam, Manzoore Elahi M. Soudagar, Yasser Fouad, and M. A. Kalam. "An Experimental Study on the Hardness, Inter Laminar Shear Strength, and Water Absorption Behavior of Habeshian Banana Fiber Reinforced Composites" Journal of Natural Fibers 21, no. 1 (2024): 2338930. Taylor and Francis https://doi.org/10.1080/15440478.2024.2338930 (WEB OF SCIENCE Indexed, 2023 Impact Factor 2.9, Q1)
- Kiran Shahapurkar, Kiran M. C., Venkatesh Chenrayan, Gangadhar Kanaginahal, Gezahgn Gebremaryam, Nik-Nazri Nik-Ghazali, Tze Mei Kuan, Azrul Mohd Ariffin, Arulraj Arunachalam, Yasser Fouad & Manzoore Elahi M. Soudagar “Flexural behavior of epoxy composites reinforced with banana fibers in different architectures: experimental, analytical, and numerical approaches” Biomass Conversion and Biorefinery (2024): 1-16, Springer https://doi.org/10.1007/s13399-024-05872-z (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.5, Q2)
- Kiran Shahapurkar, S. Ramesh, Nik-Nazri Nik-Ghazali, Gezahgn Gebremaryam, Gangadhar Kanaginahal, C. Venkatesh, Manzoore Elahi M. Soudagar, Yasser Fouad, M.A. Kalam (2024) “Tensile, Compressive, and Fracture Behavior of Habeshian Chopped Banana/Epoxy Core Sandwich Woven Banana Composite”, Biomass Conversion and Biorefinery https://doi.org/10.1007/s13399-024-05455-y (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.5, Q2)
- Kiran Shahapurkar, S. Ramesh, Nik-Nazri Nik-Ghazali, Manzoore Elahi M. Soudagar, Yasser Fouad, and M. A. Kalam (2024) "Influence of Habesha eggshell on the dry sliding wear behavior of epoxy composites" Biomass Conversion and Biorefinery (2024): 1-16, Springer https://doi.org/10.1007/s13399-024-05482-9 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.5, Q2)
- Sivalinga Dhanasingh, Devarajan P., Ramalingam B., Manzoor Soudagar, Mohanavel, V., T. M. Yunus Khan, Kiran Shahapurkar, Erdem Cuce (2024) “Current trends and biotechnology infused cleaner production of biomaterials for the construction industry: A critical review” International Journal of Low-Carbon Technologies, 19, 833-849. Oxford Press https://doi.org/10.1093/ijlct/ctad119 (WEB OF SCIENCE Indexed, 2023 impact factor 2.4, Q2)
- Venkatesh Chenrayan, Kiran Shahapurkar, Chandru Manivannan, L Rajesh Kumar, Sivakumar Nadarajan, R Venkatesan “Effect of powder composition, PTAW parameters on dilution, microstructure and hardness of Ni-Cr-Si-B alloy deposition: An experimentation followed by Machine learning technique” Heliyon, (2024), 10(16), e36087 https://doi.org/10.1016/j.heliyon.2024.e36087 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.4, Q1)
- Venkatesh Chenrayan, Kiran Shahapurkar, Siva Chitra Muthusamy, Sathish Kumar Shanmugam, Girmachew Ashagrie Zewdu, Arulraj Arunachalam, Manzoore Elahi Mohammad Soudagar, Yasser Fouad & Hanabe Chowdappa Ananda Murthy (2024) “Experimental investigation on the tensile, flexural, and thermal rigidity of ALON-reinforced Kevlar fabric-impregnated epoxy composites” International Journal of Advanced Manufacturing Technology, 2024, 133(11-12), pp. 6123–6137. Springer https://doi.org/10.1007/s00170-024-14088-4 (WEB OF SCIENCE Indexed, 2023 Impact Factor 2.9, Q2)
- Venkatesh Chenrayan, V Vaishnav, Kiran Shahapurkar, P Dhanabal, M Kalayarasan, S Raghunath, M Mano (2024) “The effect of fs-laser micromachining parameters on surface roughness, bio-corrosion and biocompatibility of nitinol”, 3 Optics & Laser Technology, Volume 170, 110200 https://doi.org/10.1016/j.optlastec.2023.110200 (WEB OF SCIENCE Indexed, 2023 Impact Factor 4.6, Q1)
- Venkatesh Chenrayan, Kiran Shahapurkar, Chandru Manivannan, Manzoore Elahi M Soudagar, Yasser Fouad, MA Kalam, M Mahmood Ali, Muhammad Nasir Bashir (2024) “Frictional stability of pumice-reinforced lightweight magnesium composite in ambient and elevated temperature environments”, Journal of Materials Research and Technology, 2024, 32, 3465-3475. Elsevier https://doi.org/10.1016/j.jmrt.2024.08.153 (WEB OF SCIENCE Indexed, 2023 Impact Factor 6.2, Q1)
- Venkatesh Chenrayan, Kiran Shahapurkar, MC Kiran, Bhuvanesh Ngarajan, Krishna Prakash Arunachalam, Alejandra Decinti Weiss, Yasser Fouad, Fahad Awjah Almehmadi, Manzoore Elahi M Soudagar (2024) “Leverage of aluminium oxynitride on the impact resistance of Kevlar?impregnated epoxy composites: Experimental and numerical evaluation under low?velocity impact”, Polymer Composites, 2024, 1-14. Wiley https://doi.org/10.1002/pc.28952 (WEB OF SCIENCE Indexed, 2023 Impact Factor 4.8, Q1)
2023
- Hailemariam Biratu, Mengistu Gelaw, Kiran Shahapurkar, Venkatesh Chenrayan, Manzoore Elahi M. Soudagar, Vineet Tirth, Ali Algahtani, and Tawfiq Al-Mughanam (2023) “Effect of Caesalpinia decapetala on the Dry Sliding Wear Behavior of Epoxy Composites”, International Journal of Polymer Science, Volume 2023, 9379277, 14 https://doi.org/10.1155/2023/9379277 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.4, Q2)
- Venkatesh Chenrayan, Gezahgn Gebremaryam, Kiran Shahapurkar, Kalayarasan Mani, Yasser Fouad, Md Abul Kalam, Nabisab Mujawar Mubarak, Manzoore Elahi Mohammad Soudagar, Bashir Suleman Abusahmin (2023) “Experimental and numerical assessment of the flexural response of banana fiber sandwich epoxy composite” Scientific Reports, Volume 13(1), 18156 https://doi.org/10.1038/s41598-023-45460-1 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.8, Q1)
- C Rathinasuriyan, PV Elumalai, J Bharani Chandar, K Karthik, Sreenivasa Reddy Medapati, Ahmad Aziz Alahmadi, Mamdooh Alwetaishi, Ali Nasser Alzaed, MA Kalam, and Kiran Shahapurkar (2023) “Welding-based additive manufacturing processes for fabrication of metallic parts”, Composites and Advanced Materials, Volume 32: 1–23 https://doi.org/10.1177/26349833231210572 (WEB OF SCIENCE Indexed, 2023 Impact Factor 1.7, Q4)
- Gezahgn Gebremaryam, Kiran Shahapurkar , Venkatesh Chenrayan, Fadi Althoey, Haitham M. Hadidi, Manzoore Elahi M. Soudagar, Vineet Tirth, Ali Algahtani, Tawfiq Al-Mughanam, Abdulaziz H. Alghtani, and H. C. Ananda Murthy (2023) “Influence of Layering Pattern, Fibre Architecture, and Alkalization on Physical, Mechanical, and Morphological Behaviour of Banana Fibre Epoxy Composites”, International Journal of Polymer Science, Volume 2023, 6023056 https://doi.org/10.1155/2023/6023056 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.4, Q2)
- Sagar D Shelare, Pramod N Belkhode, Keval Chandrakant Nikam, Laxmikant D Jathar, Kiran Shahapurkar, Manzoore Elahi M Soudagar, Ibham Veza, TM Yunus Khan, MA Kalam, Abdul-Sattar Nizami, Mohammad Rehan (2023) “Biofuels for a sustainable future: Examining the role of nano-additives, economics, policy, internet of things, artificial intelligence and machine learning technology in biodiesel production”, Energy, Volume 282, 128874 https://doi.org/10.1016/j.energy.2023.128874 (WEB OF SCIENCE Indexed, 2023 Impact Factor 9, Q1)
- Gangadhar Kanaginahal, Kiran Shahapurkar, Venkatesh Chenrayan, Chandru Manivannan, Vineet Tirth, Ali Algahtani, Tawfiq Al-Mughanam & Abdulaziz H. Alghtani (2023) “Theoretical and experimental assessment of thermal stability of novel bio-waste Habesha eggshell particles reinforced epoxy composite”, Biomass Conversion and Biorefinery https://doi.org/10.1007/s13399-023-04704-w (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.5, Q2)
- Hariharan KB, Mamdooh Alwetaishi, Ahmad Aziz Alahmadi, Ali Nasser Alzaed, Kalam MA, Kiran Shahapurkar (2023) “Effects of machining parameters on H13 die steel using CNC drilling machine”, Composites and Advanced Materials, Volume 32, 26349833231189296 https://doi.org/10.1177/26349833231189296 (WEB OF SCIENCE Indexed, 2023 Impact Factor 1.7, Q4)
- Keval Chandrakant Nikam, Laxmikant Jathar, Sagar Dnyaneshwar Shelare, Kiran Shahapurkar, Sunil Dambhare, Manzoore Elahi M Soudagar, Nabisab Mujawar Mubarak, Tansir Ahamad, MA Kalam (2023) “Parametric analysis and optimization of 660 MW supercritical power plant”, Energy, Volume 280, 128165 https://doi.org/10.1016/j.energy.2023.128165 (WEB OF SCIENCE Indexed, 2023 Impact Factor 9, Q1)
- B.Y. Santosh Kumar, G.C. Mohan Kumar, Kiran Shahapurkar, Vineet Tirth, Ali Algahtani, Tawfiq Al-Mughanam, Abdulaziz H. Alghtani, H.C. Ananda Murthy (2023) “Processing and characterization of egg shell derived nano-hydroxyapatite synthetic bone for Orthopaedic and Arthroscopy implants and substitutes in dentistry”, Journal of the Mechanical Behavior of Biomedical Materials Volume 144, 105963 https://doi.org/10.1016/j.jmbbm.2023.105963 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.3, Q2)
- A. K. Roopa, A. M. Hunashyal, Arun Y. Patil, Abhishek Kamadollishettar, Bharatkumar Patil, Manzoore Elahi M. Soudagar, Kiran Shahapurkar, T. M. Yunus Khan and M. A. Kalam (2023) “Study on Interfacial Interaction of Cement-Based Nanocomposite by Molecular Dynamic Analysis and an RVE Approach”, Advances in Civil Engineering 8404335, 18 https://doi.org/10.1155/2023/8404335 (WEB OF SCIENCE Indexed, 2023 Impact Factor 1.5, Q4)
- Vinayak Talugeri, Nagaraj Basavaraj Pattana, Veeranna Basawannappa Nasi, Kiran Shahapurkar, Manzoore Elahi Mohammad Soudagar, Tansir Ahamad, Md. Abul Kalam, Kiran Madrahalli Chidanandamurthy, Nabisab Mujawar Mubarak and Rama Rao Karri (2023) “Experimental investigation on a solar parabolic collector using water?based multi?walled carbon?nanotube with low volume concentrations”, Scientific Reports-Nature 13, 7398 https://doi.org/10.1038/s41598-023-34529-6 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.8, Q1)
- Mohamed Yassin, Kiran Shahapurkar, Venkatesh Chenrayan, Ibrahim M. Alarifi, Mohammed A. Alamir, Tarek M. A. A. El-Bagory (2023) “Investigation of tensile and flexural properties of habesha moringa-bamboo fiber reinforced epoxy hybrid composite”, Polymer Composites 44(7): 4121-4133 https://doi.org/10.1002/pc.27384 (WEB OF SCIENCE Indexed, 2023 impact factor 4.8, Q1)
- Keyredin Selman, Kiran Shahapurkar, Venkatesh Chenrayan, Mohammed A. Alamir, Ibrahim M. Alarifi, Vineet Tirth, Abdulaziz H. Alghtani, Ali Algahtani, Tawfiq Al-Mughanam (2023) “Flexural and tensile behavior of Kulkual fiber and TiB2 particles reinforced epoxy composites”, Polymer Composites 44(7): 4142-4154 https://doi.org/10.1002/pc.27386 (WEB OF SCIENCE Indexed, 2023 impact factor 4.8, Q1)
- Vijayakumar Nimbagal, N. R. Banapurmath, M. A. Umarfarooq, Suraj Revankar, Ashok M. Sajjan, Manzoore Elahi M. Soudagar, Kiran Shahapurkar, Mohammed A. Alamir, Ibrahim M. Alarifi, Ashraf Elfasakhany (2023) “Mechanical and fracture properties of carbon nano fibers/short carbon fiber epoxy composites”, Polymer Composites 44(7), 3977 https://doi.org/10.1002/pc.27371(WEB OF SCIENCE Indexed, 2023 impact factor 4.8, Q1)
- Venkatesh Chenrayan, V. Vaishnav, Kiran Shahapurkar, Chandru Manivannan, Vineet Tirth, Ibrahim M. Alarifi, Mohammed A. Alamir (2023) “Tribological performance of TiB2-graphene Al 7075 hybrid composite processed through squeeze casting: At room and high temperature”, Tribology International, 185, 108486 (Elsevier, SCI, I.F.- 5.62) https://doi.org/10.1016/j.triboint.2023.108486 (WEB OF SCIENCE Indexed, 2023 impact factor 6.1, Q1)
- Laxmikant D. Jathar, S. Ganesan, Umesh Awasarmol, Keval Nikam, Kiran Shahapurkar, Manzoore Elahi M. Soudagar, H. Fayaz, A.S. El-Shafay, M.A. Kalam, Salwa Boudila, Sara Baddadi, Vineet Tirth, Abdul Sattar Nizami, Su Shiung Lam, Mohammad Rehan (2023) “Comprehensive review of environmental factors influencing the performance of photovoltaic panels: Concern over emissions at various phases throughout the lifecycle”, Environmental Pollution, 326, 121474 https://doi.org/10.1016/j.envpol.2023.121474 (WEB OF SCIENCE Indexed, 2023 impact factor 7.6, Q1)
- Venkatesh Chenrayan, Kiran Shahapurkar, Gangadhar M. Kanaginahal, Vineet Tirth, Abdulaziz H. Alghtani, Ali Algahtani, Fadi Althoey, Manzoore Elahi M. Soudagar, Chandru Manivannan and H. C. Ananda Murthy (2023) “Evaluation of dynamic mechanical analysis of crump rubber epoxy composites: experimental and empirical perspective”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 145 https://doi.org/10.1007/s40430-023-04033-z (WEB OF SCIENCE Indexed, 2023 impact factor 1.8, Q3)
- Kiran Shahapurkar, MC Kiran, Mohammed A Alamir, Vineet Tirth, Ibrahim M Alarifi and Venkatesh Chenrayan (2023) “Quasi-static compressive behaviour of epoxy composites reinforced with crumb rubber”, Polymer and Polymer Composites”, 31: 1–9 https://doi.org/10.1177/09673911231158995 (WEB OF SCIENCE Indexed, 2023 impact factor 2.1, Q3)
- Gangadhar M. Kanaginahal , Suresh Hebbar, Kiran Shahapurkar, Mohammed A. Alamir, Vineet Tirth, Ibrahim M. Alarifi, Mika Sillanpaa, H.C.Ananda Murthy (2023) “Leverage of weave pattern and composite thickness on dynamic mechanical analysis, water absorption and flammability response of bamboo fabric/epoxy composites”, Heliyon, 9(1), e12950 https://doi.org/10.1016/j.heliyon.2023.e12950 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.4, Q1)
2022
- Muhammad Hammad Mushtaq, Fahad Noor, M.A. Mujtaba, Salman Asghar, Abdulfatah Abdu Yusuf, Manzoore Elahi M Soudagar, Abrar Hussain, Mohamed Fathy Badran, Kiran Shahapurkar (2022) “Environmental Performance of Alternative Hospital Waste Management Stratergies using Life Cycle Assessment (LCA) Approach”, Sustainability, 14(22), 14942 https://doi.org/10.3390/su142214942 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.3, Q2)
- Fadi Althoey, Ibrahim Y Hakeem, Md Akter Hosen, Shaker Qaidi, Haytham F Isleem, Haitham Hadidi, Kiran Shahapurkar, Jawad Ahmad, Elias Ali (2022) “Behavior of Concrete Reinforced with Date Palm Fibers”, Materials, 15(22), 7923 https://doi.org/10.3390/ma15227923 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.1, Q1)
- Venkatesh Chenrayan, Chandru Manivannan, Kiran Shahapurkar, Ankit Krishna, Vineet Tirth, Ali Algahtani, Ibrahim M. Alarifi (2022) “Machinability performance investigation of TiAlN, DLC, and CNT coated tools during turning of Difficult-to-cut Materials”, Journal of Nanomaterials, 9664365 https://doi.org/10.1155/2022/9664365 (SCOPUS Indexed)
- Kalkidan Gossaye, Kiran Shahapurkar, Chenrayan Venkatesh, Ibrahim Alarifi, Vineet Tirth, Manzoore Elahi M. Soudagar, Ali Algahtani, Abdulaziz H. Alghtani (2022), “Compressive behavior of Habesha eggshell particulate reinforced epoxy composites”, Polymer Composites 44(1), 562 https://doi.org/10.1002/pc.27119 (WEB OF SCIENCE Indexed, 2023 Impact Factor 4.8, Q1)
- N. Mathimurugan, V. Vaishnav, R. Praveen Kumar, P. Boobalan, S. Nandha, Venkatesh Chenrayan, Kiran Shahapurkar, Vineet Tirth, Ibrahim M. Alarifi, Moutaz Mustafa A. Eldirderi, Khaled Mohamed Khedher and Hadee Mohammed Najm (2022) Room and High Temperature Tensile Responses of Tib2-Graphene Al 7075 Hybrid Composite Processed through Squeeze Casting”, Nanomaterials, 12(18), 3124 https://doi.org/10.3390/nano12183124 (WEB OF SCIENCE Indexed, 2023 Impact Factor 4.4, Q1)
- Muhammad Asim, Adnan Qamar, Ammara Kanwal, Ghulam Moeen Uddin, Muhammad Mujtaba Abbas, Muhammad Farooq, M. A. Kalam, Mohamed Mousa and Kiran Shahapurkar (2022) “Opportunities and Challenges for Renewable Energy Utilization in Pakistan”, Sustainability, 14(17), 10947 https://doi.org/10.3390/su141710947 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.3, Q2)
- Mantesh C. Choukimath, Nagaraj R. Banapurmath, Fahid Riaz, Arun Y. Patil, Arun R. Jalawadi, M. A. Mujtaba, Kiran Shahapurkar, T. M. Yunus Khan, Mishal Alsehli, Manzoore Elahi M. Soudagar and I. M. R. Fattah (2022) “Experimental and Computational Study of Mechanical and Thermal Characteristics of h-BN and GNP Infused Polymer Composites for Elevated Temperature Applications”, Materials 15(15), 5397 https://doi.org/10.3390/ma15155397 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.1, Q1)
- Razia Sulthana, Syed Noeman Taqui, Usman Taqui Syed, Manzoore Elahi M. Soudagar, M.A. Mujtaba, Rayees Afzal Mir, Kiran Shahapurkar, Abdulqhadar Khidmatgar, V. Mohanavel, Akheel Ahmed Syed, Nazia Hossain (2022) “Biosorption of crystal violet by nutraceutical industrial fennel seed spent equilibrium, kinetics, and thermodynamic studies”, Biocatalysis and Agricultural Biotechnology, 43, 102402 https://doi.org/10.1016/j.bcab.2022.102402 (WEB OF SCIENCE Indexed)
- S.S. Halewadimath, N.R. Banapurmath, V.S. Yaliwal, M.G. Prasad, S.S. Jalihal, Manzoore Elahi M. Soudagar, Haseeb Yaqoob, M.A. Mujtaba, Kiran Shahapurkar, Mohammad Reza Safaei (2022) “Effect of manifold injection of hydrogen gas in producer gas and neem biodiesel fueled CRDI dual fuel engine”, International Journal of Hydrogen Energy, 47(62), 25913-25928 https://doi.org/10.1016/j.ijhydene.2022.02.135 (WEB OF SCIENCE Indexed, 2023 Impact Factor 8.1, Q1)
- Kiran Shahapurkar, Mengistu Gelaw, Vineet Tirth, Manzoore Elahi M. Soudagar, Pavan Shahapurkar, MA Mujtaba, Kiran MC, Gulam Mohammed Sayeed Ahmed (2022) “Comprehensive review on polymer composites as electromagnetic interference shielding materials”, Polymers and Polymer Composites, 30, 1-17 https://doi.org/10.1177/09673911221102127 (WEB OF SCIENCE Indexed, 2023 impact factor 2.1, Q3)
- Venkatesh Chenrayan, Chandru Manivannan, Kiran Shahapurkar, Girmachew Ashegiri Zewdu, N. Maniselvam, Ibrahim M. Alarifi, Khalid Alblalaihid, Vineet Tirth, Ali Algahtani (2022) “An experimental and empirical assessment of machining damage of hybrid glass-carbon FRP composite during abrasive water jet machining”, Journal of Materials Research and Technology, 19, 1148-1161 https://doi.org/10.1016/j.jmrt.2022.05.042 (WEB OF SCIENCE Indexed, 2023 impact factor 6.2, Q1)
- Kiran Shahapurkar, Khalid Alblalaihid, Venkatesh Chenrayan, Abdulaziz H. Alghtani, Vineet Tirth, Ali Algahtani, Ibrahim M. Alarifi, and Kiran MC (2022) "Quasi-Static Flexural Behavior of Epoxy-Matrix-Reinforced Crump Rubber Composites", Processes 10(5), 956 https://doi.org/10.3390/pr10050956 (WEB OF SCIENCE Indexed, 2023 impact factor 2.8, Q2)
- Khalid Alblehed, Kiran Shahapurkar, Venkatesh Chenrayan, Hailu Beyecha, Vineet Tirth, Ali Algahtani, Manzoore Elahi M. Soudagar and Vinayak Talugeri (2022) “Experimental investigation on the flexural response of epoxy composites filled with environmental pollutant crump rubber”, Materials Research Express, 9, 035503 https://doi.org/10.1088/2053-1591/ac5caf (WEB OF SCIENCE Indexed, 2023 impact factor 1.8, Q4)
- Sandeep V. Gujjar, Nandini Nadar, Kanaram Choudhary, Anand M. Hunashyal, Kiran Shahapurkar, M. A. Mujtaba, Mohammed Asadullah, Manzoore Elahi M. Soudagar, T. M. Yunus Khan, Khadiga Ahmed Ismail and Ashraf Elfasakhany (2022) “Investigation of Various Coating Resins for Optimal Anticorrosion and Mechanical Properties of Mild Steel Surface in NaCl Solution”, Advances in Materials Science and Engineering, 2203717 https://doi.org/10.1155/2022/2203717 (WEB OF SCIENCE Indexed)
- Chenrayan, V., Vaishnav, V., Kiran Shahapurkar, Vineet Tirth, Ibrahim Alarifi, Chandru Mannivanan, and Manzoore Elahi M. Soudagar (2022) “A comprehensive analysis to assess the impact of nano MoS2 on the wear characteristic of Al-TiB2-Gr composite”, Materials Research Express, 9, 016525 https://doi.org/10.1088/2053-1591/ac4c18 (WEB OF SCIENCE Indexed, 2023 impact factor 1.8, Q4)
2021
- Kumar, D., Kiran Shahapurkar, C. Venkatesh, Muruganandhan R., Vineet Tirth, Chandru Manivannan, Ibrahim Alarifi, Manzoore Elahi M. Soudagar, Ahmed S. El-Shafay (2021) “Influence of Graphene Nano Fillers and Carbon Nano Tubes on the Mechanical and Thermal Properties of Hollow Glass Microsphere Epoxy Composites”, Processes 10(1), 40 https://doi.org/10.3390/pr10010040 (WEB OF SCIENCE Indexed, 2023 impact factor 2.8, Q2)
- Sharanabasava V. Ganachari, Veerabhadragouda B. Patil, Nagaraj R. Banapurmath, Manzoore Elahi M. Soudagar, Kiran Shahapurkar, Ashraf Elfasakhany, Mishal Alsehli, Akshata Yavagal, Pradyumna Mogre, Vijayakumar M Hiremath and Shankar A. Hallad (2021) “The Investigation of Mixed Ferrofluids Containing Iron Oxide nanoparticles and Microspheres”, Advances in Materials Science and Engineering, 7616666 https://doi.org/10.1155/2021/7616666 (WEB OF SCIENCE Indexed)
- Akkoli, K.M., Banapurmath, N.R., Manzoore Elahi M Soudagar, T.M., Baig, M.A.A., Mujtaba, M.A., Hossain, N., Kiran Shahapurkar, Elfasakhany, A., Alsehli, M. and Yaliwal, V.S., (2021) “Effect of Producer Gas from Redgram Stalk and Combustion Chamber Types on the Emission and Performance Characteristics of Diesel Engine”, Energies, MDPI, 14(18), 5879 https://doi.org/10.3390/en14185879 (WEB OF SCIENCE Indexed, 2023 impact factor 3, Q1)
- L. Ranganatha Swamy,N. R. Banapurmath,T. K. Chandrashekar, Manzoore Elahi M. Soudagar, M. Gul, Nik-Nazri Nik-Ghazali, M. A Mujtaba, Kiran Shahapurkar, Ümit A?bulut, Hashim M. Alshehri, A.M. Sajjan and Marjan Goodarzi (2021) “Effect of injection timing and duration on the performance of diesel engine fueled with port injection of oxygenated fuels”, Chemical Engineering Communications 210(6), 1060–1072 https://doi.org/10.1080/00986445.2021.2013211 (WEB OF SCIENCE Indexed, 2023 Impact Factor 1.9, Q2)
- J. Sadhik Basha, Tahereh Jafary, Ranjit Vasudevan, Jahanzeb Khan Bahadur, Muna Al Ajmi, Aadil Al Neyadi, Manzoore Elahi M. Soudagar, MA Mujtaba, Abrar Hussain, Waqar Ahmed, Kiran Shahapurkar, S. M. Ashrafur Rahman and I. M. Rizwanul Fattah (2021) “Potential of utilization of renewable energy technologies in gulf countries”, Sustainability 3 (18), 10261 https://doi.org/10.3390/su131810261 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.3, Q2)
- Kiran Shahapurkar, Venkatesh Chenrayan , Belay Brehane Tesfamarium, Manzoore Elahi M. Soudagar , Nazia Hossain, Ali A. Rajhi , Sagr Alamri, Ibrahim M. Alarifi, Pavan Shahapurkar, M. A. Mujtaba, M. C. Kiran and Gulam Mohammed Sayeed Ahmed (2021) “Parametric Analysis of Epoxy/Crumb Rubber Composite by Using Taguchi—GRA Hybrid Technique composites”, Polymers, 13(19), 3441 https://doi.org/10.3390/polym13193441 (WEB OF SCIENCE Indexed, 2023 Impact Factor 4.7, Q1)
- Kiran Shahapurkar, C. Venkatesh, Manzoore Elahi M. Soudagar, Irfan Anjum Badruddin, Pavan Shahapurkar, Ashraf Elfasakhany, MA Mujtaba, Md Irfanul Haque Siddiqui , Masood Ashraf Ali and Teuku Meurah Indra Mahlia (2021) “Leverage of environmental pollutant crump rubber on the dry sliding wear response of epoxy composites”, Polymers, 13(17), 2894 https://doi.org/10.3390/polym13172894 (WEB OF SCIENCE Indexed, 2023 Impact Factor 4.7, Q1)
- Venkatesh Chenrayan, Chandru Manivannan, Selladurai Velappan, Kiran Shahapurkar, Manzoore Elahi M. Soudagar , Ashraf Elfasakhany, Ravinder Kumar and Catalin I. Pruncu (2021) “Experimental assessment on machinability performance of CNT and DLC coated HSS tools for hard turning”, Diamond and Related Materials 119, 108568 https://doi.org/10.1016/j.diamond.2021.108568 (WEB OF SCIENCE Indexed, 2023 Impact Factor 4.3, Q2)
- Manzoore Elahi M. Soudagar, Haris Mahmood Khan, T. M. Yunus Khan, Luqman Razzaq, Tahir Asif, M. A. Mujtaba, Abrar Hussain, Muhammad Farooq, Waqar Ahmed, Kiran Shahapurkar, Azham Alwi, T. M. Ibrahim Usama Ishtiaq, Ashraf Elfasakhany, Maughal Ahmed Ali Baig, Mohammad Shahab Goodarzi and Mohammad Reza Safaei (2021) “Experimental Analysis of Engine Performance and Exhaust Pollutant on a Single-Cylinder Diesel Engine Operated Using Moringa Oleifera Biodiesel”, Applied Sciences, 11(15), 7071 https://doi.org/10.3390/app11157071 (WEB OF SCIENCE Indexed, 2023 Impact Factor 2.5, Q1)
- Kiran Shahapurkar (2021) “Tensile behavior of environmental pollutant crumb rubber filled epoxy composites”, Materials Research Express, 8, 095505 https://doi.org/10.1088/2053-1591/ac1f4b (WEB OF SCIENCE Indexed, 2023 Impact Factor 1.8, Q4)
- Kiran Shahapurkar, Manzoore Elahi M. Soudagar, Pavan Shahapurkar, Mahantayya Mathapathi, T.M. Yunus Khan, MA Mujtaba, MD Irfan Ali, Kumara Thanaiah, Md Irfanul Haque Siddiqui and Masood Ashraf Ali (2021) “Effect of crump rubber on the solid particle erosion response of epoxy composites”, Journal of Applied Polymer Science, 139( 2), 51470 https://doi.org/10.1002/app.51470 (WEB OF SCIENCE Indexed, 2023 Impact Factor 2.7, Q2)
- Mohanram Parthiban, Venkatesh Chenrayan, Chandraprabhu Venkatachalam, Kiran Shahapurkar and Addisu Bekele (2021) “An experimental assisted mathematical modeling to study the desorption capacity of the clay based solid desiccant”, Materials Research Express, 8, 075501 https://doi.org/10.1088/2053-1591/ac0c51 (WEB OF SCIENCE Indexed, 2023 Impact Factor 1.8, Q4)
- Laxmikant D Jathar, S Ganesan, Kiran Shahapurkar, Manzoore Elahi M Soudagar, MA Mujtaba, Ali E Anqi, Muhammad Farooq, Abdulqhadar Khidmatgar, Marjan Goodarzi, Mohammad Reza Safaei (2021) “Effect of various factors and diverse approaches to enhance the performance of solar stills: a comprehensive review”, Journal of Thermal Analysis and Calorimetry Volume 147, pages 4491–4522 https://doi.org/10.1007/s10973-021-10826-y (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.2, Q2)
- L Razzaq, MA Mujtaba, Manzoore Elahi M Soudagar, Waqar Ahmed, Fayaz Hussain, Shahid Bashir, IM Rizwanul Fattah, Hwai Chyuan Ong, Kiran Shahapurkar, Asif Afzal, S Wageh, Ahmed Al-Ghamdi, Muhammad Shujaat Ali, Ahmed I El-Sessy (2021) “Engine performance and emission characteristics of palm biodiesel blends with grapheme oxide nanoplatelets and dimethyl carbonate additives”, Journal of Environmental Management, 282, 111917 https://doi.org/10.1016/j.jenvman.2020.111917 (WEB OF SCIENCE Indexed, 2023 Impact Factor 8, Q1)
2020
- Kiran Shahapurkar, Vaibhav Darekar, Ningappa Nidasosi, Rashmi Banjan and Manzoore ELahi M Soudagar (2020) “Factors affecting the solid particle erosion of environment pollutant and natural particulate filled polymer composites – A Review” Polymers and Polymer Composites https://doi.org/10.1177%2F0967391120971411 (WEB OF SCIENCE Indexed, 2023 Impact Factor 2.1, Q3)
- Manzoore Elahi M Soudagara, MA Mujtabaa, Mohammad Reza Safaei, Asif Afzal, Vallapudi Dhana Raju, Waqar Ahmed, N. R. Banapurmath, Nazia Hossain, Shahid Bashir, Irfan Anjum Badruddin, Marjan Goodarzi, Kiran Shahapurkar and Syed Noeman Taqui (2020) “Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristic” Energy, 215, 119094 https://doi.org/10.1016/j.energy.2020.119094 (WEB OF SCIENCE Indexed, 2023 Impact Factor 9, Q1)
- Manzoore Elahi M Soudagar, Asif Afzal, Mohammad Reza Safaei, Muthu Manokar, Olusegun David Samuel, MA Mujtabaa, Waqar Ahmed, Kiran Shahapurkar and Marjan Goodarzi (2020) “Investigation on the effect of cottonseed oil blended with different percentage of octanol and suspended MWCNT nanoparticles on diesel engine characteristics” Journal of Thermal Analysis and Calorimetry https://doi.org/10.1007/s10973-020-10293-x (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.2, Q2)
- Kiran Shahapurkar (2020) “Compressive behaviour of crump rubber reinforced epoxy composites” Polymer Composites, 42, 329-341 https://doi.org/10.1002/pc.25828 (WEB OF SCIENCE Indexed, 2023 impact factor 4.8, Q1)
- Rakhamaji S Gavhane, Ajit M Kate, Abhay Pawar, Mohammad Reza Safaei, Manzoore Elahi M Soudagar, Muhammad Mujtaba Abbas, Hafiz Muhammad Ali, Nagaraj R Banapurmath, Marjan Goodarzi, Irfan Anjum Badruddin, Waqar Ahmed and Kiran Shahapurkar (2020) “Effect of Zinc oxide nano-additives and soyabean biodiesel at varying loads and compression ratios on VCR diesel engine characteristics”, Symmetry, 12(6), 1042 (MDPI, SCI, I.F.-2.940) https://doi.org/10.3390/sym12061042 (WEB OF SCIENCE Indexed, 2023 Impact Factor 2.2, Q2)
2019
- Mohammed Kareemulla, Asif Afzal, Fazlur K Rehman, Kiran Shahapurkar, Hurmathulla Khan, Naveed Akram (2019) “Performance and Emission Analysis of CI Engine using Biodiesels from Acid oil, Mahua oil and Castor oil” Heat Transfer-Asian Research, 49, 858-871 https://doi.org/10.1002/htj.21642 (WEB OF SCIENCE Indexed)
- Asif Afzal, Manzoore Elahi M Soudagar, Kiran Shahapurkar, Mithun Kanchan, T M Yunus Khan, Nagraj Banapurmath, Navid Akram, Suresh Mane (2019) “Optimum Location and Influence of Tilt Angle on Performance of Solar PV panels” Journal of Thermal Analysis and Calorimetry, 141, 511-532 https://doi.org/10.1007/s10973-019-09089-5 (WEB OF SCIENCE Indexed, 2023 Impact Factor 3.2, Q2)
- Peter Breunig, Vinay Damodaran, Kiran Shahapurkar, Sunil Waddar, Mrityunjay Doddamani, P Jeyaraj, and Pavana Prabhakar (2019) “Dynamic Impact Behavior of Syntactic Foam Core Sandwich Composites” Journal of Composite Materials, 54, 535-547 https://doi.org/10.1177/0021998319885000 (WEB OF SCIENCE Indexed, 2023 Impact Factor 2.3, Q3)
2018
- Kiran Shahapurkar, Vikas Bapurao Chavan, Mrityunjay Doddamani and G.C. Mohan Kumar (2018) “Influence of surface modification on wear behavior of fly ash cenosphere/epoxy syntactic foam” Wear, 414–415, 327-340 https://doi.org/10.1016/j.wear.2018.09.001 (WEB OF SCIENCE Indexed, 2023 impact factor 5.3, Q1)
- Carlos Garcia, Kiran Shahapurkar, Mrityunjay Doddamani, G.C.Mohan Kumar and Pavana Prabhakar (2018) “Effect of arctic environment on flexural behavior of fly ash cenosphere reinforced epoxy syntactic foams”, Composite Part B : Engineering, 151, 265-273 https://doi.org/10.1016/j.compositesb.2018.06.035 (WEB OF SCIENCE Indexed, 2023 impact factor 12.7, Q1)
- Kiran Shahapurkar, Mrityunjay Doddamani, G.C. Mohan Kumar and Nikhil Gupta (2018) “Effect of cenosphere filler surface treatment on the erosion behaviour of epoxy matrix syntactic foams”, Polymer Composites, 40, 2109-2118 https://doi.org/10.1002/pc.24994 (WEB OF SCIENCE Indexed, 2023 impact factor 4.8, Q1)
- Kiran Shahapurkar, Carlos Garcia, Mrityunjay Doddamani, G.C.Mohan Kumar and Pavana Prabhakar (2018) “Compressive behavior of cenosphere/epoxy syntactic foams in arctic conditions”, Composite Part B : Engineering, 135, 253-262 https://doi.org/10.1016/j.compositesb.2017.10.006 (WEB OF SCIENCE Indexed, 2023 impact factor 12.7, Q1)
INTERNATIONAL CONFERENCE PROCEEDING PUBLICATIONS
- Kiran Shahapurkar, Mrityunjay Doddamani and G.C. Mohan Kumar (2018) “Tensile behavior of cenosphere/epoxy Syntactic foams.” Advances in Mechanical Design, Materials and Manufacture, AIP Conf. Proc. 1943, 020100-1–020100-7 (Elsevier, Scopus) https://doi.org/10.1063/1.5029676
- Peter Breunig, Vinay Damodaran, Kiran Shahapurkar, Sunil Waddar, Mrityunjay Doddamani, P Jeyaraj, G C Mohan Kumar and Pavana Prabhakar (2018) “Dynamic Impact Behavior of Syntactic Foam Core Sandwich Composites” American Society for Composites - 33rd Annual Technical Conference, September 24-26, 2018, University of Washington, Seattle, USA http://dpi-proceedings.com/index.php/asc33/article/view/259729
- Vaibhav Darekar, Sunil Waddar, Laxmikant Jathar, Sameer Tamboli, Mahantayya Mathapathi, Rakshith H S, Manzoore Elahi M Soudagar and Kiran Shahapurkar (2019) “Wear Response Review of Natural and Environment Pollutant Filled Polymer Composites” Advances in Mechanical Design, Materials and Manufacture, AIP Conf. Proc. (Elsevier, Scopus) https://doi.org/10.1063/5.0003991
- Laxmikant Jathar, S Ganesan, Kiran Shahapurkar, Siddappa Patil, Vaibhav Darekar and Vishal Chincholi (2019) “Predicting Thermal Behavior of Solar Stills with Diverse Designs – A Comprehensive Review” Advances in Mechanical Design, Materials and Manufacture, AIP Conf. Proc. (Elsevier, Scopus) https://doi.org/10.1063/5.0003821
- Manzoore Elahi M Soudagar, Nik-Nazri Nik-Ghazali, Naveed Akram, Muhammad Ahmed Al-Rashid, Vinayak Kallannavar, Asif Afzal, Kiran Shahapurkar, Rijavan Farade and Hurmathulla Khan (2019) “The Potential of Nanoparticle additives in biodiesel: A fundamental outset” Advances in Mechanical Design, Materials and Manufacture, AIP Conf. Proc. 030003-1–030003-6 https://doi.org/10.1063/5.0003775
PATENT
- Solar-powered bird and animal repeller for agriculture (2023), The Patent Office Journal No. 48/2023, Official Journal of The Patent Office, Govt. of India.
BOOK CHAPTER
- Sateesh Kanakannavar, Kiran Shahapurkar, Gangadhar Kanaginahal, Rayappa Mahale, Prashant Kakkamari, “Mechanical alloying of magnesium and titanium alloys” Advancements in Powder Metallurgy: Processing, Applications, and Properties, 2024, pp. 127–150
INTERNATIONAL CONFERENCES
- Kiran Shahapurkar, Mrityunjay Doddamani, G.C. Mohan Kumar (2016). “Mechanical behavior of cenosphere/epoxy syntactic foam composites.” International Symposium for Research Scholars, December 21-23, 2016, IIT Madras, Chennai, India.
- Kiran Shahapurkar, Mrityunjay Doddamani, G.C. Mohan Kumar (2017). “Tribological response of cenosphere/epoxy syntactic foams.” International Conference on Composite and Nano engineering, July 16-20, 2017, Rome, Italy.
- Kiran Shahapurkar, G.C. Mohan Kumar and Mrityunjay Doddamani (2017). “Quasi static compressive response of cenosphere/epoxy Syntactic foams.” Twenty-Sixth International Conference on Processing and Fabrication of Advanced Materials, October 16-21, 2017, Chonbuk National University, Jeonju, South Korea.
- Kiran Shahapurkar, Mrityunjay Doddamani and G.C. Mohan Kumar (2017). “Analysis of tensile properties of cenosphere/epoxy Syntactic foams.” International Conference on Advances in Polymer Science and Technology, November 23-25, 2017, Indian Institute of Technology, New Delhi, India.
- Kiran Shahapurkar, Mrityunjay Doddamani and G.C. Mohan Kumar (2017). “Quasi static compressive response of cenosphere/epoxy Syntactic foams.” International Conference on Advances in Materials and Processing: Challenges and Opportunities, November 29-December 02, 2017 Indian Institute of Technology, Roorkee, India.
- Kiran Shahapurkar, Mrityunjay Doddamani and G.C. Mohan Kumar (2018). “Flexural response of Cenosphere/Epoxy Syntactic Foams” 7th International Engineering Symposium (IES2018), March 06- 13, 2018 Kumamoto University, Kumamoto, Japan.
- Kiran Shahapurkar, Mrityunjay Doddamani and G.C. Mohan Kumar (2018). “Erosion response of cenosphere/epoxy syntactic foams.” International Conference on Composite and Nano engineering, July 15-21, 2018, Paris, France.
- Rohit Chougule, Sushant Ghadge, Rushikesh Bhandwale, Ajit Gavade, Nikhil Kumbhar, Kiran Shahapurkar, Mrityunjay Doddamani (2019). “Impact response of Cenosphere/Epoxy Syntactic Foams.” Sixth International Conference on Recent Advances in Composite Materials, February 25-28, 2019, Indian Institute of Technology, Varanasi, India.
- Perumalla J Ramulu, Kiran Shahapurkar, Santosh Chavan, Selvaraj Manickam (2021). “Mechanical Properties of Aluminium Based Metal Matrix Composites – A Review” International Conference on Engineering Research and Technology Transfer, May 13-15, 2021, Bule Hora University, Ethiopia.
- Mohamed Yassin, Keyredin Selman, Kalkidan Gossaye Mahteme, Perumalla J Ramulu, Mengistu Gelaw, Kiran Shahapurkar (2021). “Flexural response of waste materials filled polymer matrix composites – A Review” International Conference on Engineering Research and Technology Transfer, May 13-15, 2021, Bule Hora University, Ethiopia.
RESEARCH PROJECTS
- Chenrayan Venkatesh, Kiran Shahapurkar (Co-Investigator), Girmachu Zewdu “Development of ballistic wallpaper for the Ethiopian defense application” funded by the School of Mechanical, Chemical and Materials Engineering (Technology Transfer), Adama Science and Technology University.
RESEARCH INTEREST
- Renewable Energy • Biofuels • Solar Energy • Polymer Composites • Syntactic Foams • Natural fibers • Waste Materials Management •
REVIEWER OF JOURNALS
- Polymer Composites • Materials Research Express • Journal of Ambient Energy • Applied Mechanics • Polymer and Polymer Composites • Composite Communications • Case Studies in Thermal Engineering • Journal of Nanomaterials • Fibers and Polymers • Advanced Composites and Hybrid Materials • Silicon • Journal of Composites Materials • PLOS • Polymer Engineering and Science • Biomass Conversion and Management • Journal of Science: Advanced Materials and Devices • Journal of Composite Materials • Composite Part B
SUBJECTS HANDLED
- Manufacturing Engineering, Engineering Materials, Industrial Management and Engineering Economics, Finite Element Methods, Material Handling Equipment Elements of Mechanical Engineering, Tribology, Materials Engineering and Technology, Fluid Mechanics
WORKSHOPS ATTENDED
- Certificate Course on Materials Characterization at IIT Madras, Chennai organized by IIM-HRD Centre, The Indian institute of Metals, Chennai Chapter and Department of Metallurgical and Materials Engineering, IIT Madras, 15 – 18 June 2016
- 3 Days workshop on Advanced Materials and Manufacturing at National Institute of Technology Karnataka (NITK), Surathkal, Mangalore, Karnataka, 28-30 September 2016
- GIAN course on Hybrid Composites: Manufacturing, Mechanics and Materials at National Institute of Technology Karnataka (NITK), Surathkal, Mangalore, Karnataka, 18-22 Dec. 2016
- Three-day National Workshop on Laser Processing of Materials at National Institute of Technology Karnataka (NITK), Surathkal, Mangalore, Karnataka, March 09 - 11, 2017
- Attended the 4th Spring Internship Program (SIP2018) during March 6-13, 2018 held at Kumamoto University, Japan
PROJECT GUIDED (UG AND PG)
- Experimental Investigation on the Quasi-Static Compression and Flexural Behavior of Habesha Eggshell Reinforced Epoxy Composite (PG)
- Fabrication and Mechanical Testing of Titanium diboride and Cactus (Kulkual) Fiber Reinforced Epoxy Composite (PG)
- Experimental Investigation of Mechanical Behavior of Moringa/Bamboo Fiber Reinforced Epoxy Hybrid Composite (PG)
- Experimental and Tribological Investigation of Caesalpinia Decapitala Shell Particulate Reinforced Epoxy Composites (PG)
- Experimental Investigation of short banana fiber epoxy core sandwiched with woven banana fiber (PG)
- Experimental Investigation of Pumice Particulate Reinforced Epoxy Composites (PG)
- Design and Development of CNC Controlled Abrasive Water Jet Cutting Machine (UG)
- Design and Modeling of stair Climbing Trolley (UG)
- Design and Analysis of Bamboo Frame Hybrid Bicycle (UG)
- Design and fabrication of manually operated plant plastic pot cutting and adjusting machine (UG)
- Design of Belt Conveyor for Dish Carrying Application for Adama Science and Technology University Student’s Cafeteria (UG)