Department of Science & Centre of Excellence - Water Research

(ICSSD - 2022)

December 9-10, 2022

(Virtual Mode)

Important Dates

About Us


Alliance reimagines the idea of the university by creating a community that leads the charge against the complex challenges of the 21st century. The university conceives research to be the essence of all teaching and learning practices. A unity between research and teaching is promoted to extend the frontiers of knowledge in order to solve real world problems at the local, national, and global scale. For this purpose, the university seeks to be the nerve centre of interaction between the industry, the government, the civil society, and the community at large. In times when technological and social change is transforming the very idea of employability, the university embraces the increasing diversity of specializations while retaining the impulse to unify all knowledge. A designed convergence of the business, engineering, law and liberal arts units precipitates transdisciplinarity as the core academic philosophy. Freely working across divergent streams of knowledge like public policy and data science, technology and law, physics and philosophy or businesses and rhetoric, transdisciplinarity nurtures a dynamic foundation for the spirit of collaboration, inquiry, and enterprise.


Department of Science was established to support the growing dependency on science from an interdisciplinary approach. The department is engaged in imparting quality education and focused research. Research areas of interest include polymer nanocomposites, coatings, food packaging’s, shape memory polymers, corrosion study, drug delivery, green composites, self-healing composites, laser spectroscopy, energy storage materials, membrane technology, water chemistry and purification, medicinal chemistry, etc. The department is dedicated to the betterment of the student community and the advancement of science and technology.

Conference Overview

Sustainability, eco-friendly, reusability, and minimum wastage are the fundamentals of the circular economy. Climate change, population explosion, agricultural degradation, environmental pollution, and technology encroaching on privacy are the common problems that are affecting the peace and livelihood of people around the world. It is important to point out that the use of toxic chemicals, petroleum-based plastic products, etc., in one way or another makes the earth uninhabitable. Therefore, there is a quest for green or sustainable materials from renewable sources to replace toxic materials. The UN’s goals of 2030 are for inclusive sustainable development and 2022 is a year of science for sustainable development as declared by UNESCO. Also, the Paris agreement for sustainable development emphasizes the need for zero carbon emission. To make this planet better, the need of the hour is to employ interdisciplinary research, and technological innovations, and infuse scientific temperament among every stakeholder.

Recently, there is an upsurge in the use of sustainable materials in all fields such as medicine, automotive, construction and building, water treatment, fuel sector, and other industrial applications to reduce waste, pollution issues, and toxicity. However, the use of materials from renewable resources is still in small quantities compared to traditional materials. Therefore, a conference on "Science for Sustainable Development (SSD 2022) is essential for awareness of sustainable development. It is very important to study, learn, and discuss with researchers across the globe to formulate guidelines for a sustainable ecosystem. This conference platform will provide knowledge exchange and collaborations with scientists and researchers across the globe.

The conference conveners cordially invite scientists, academicians, industry experts, and students from across the globe to be part of the International Conference on Science for Sustainable Development to be conducted by the Department of Science and Centre of Excellence-Water Research, Alliance University, Bengaluru, India on December 9-10, 2022.

Conference Themes

  • Clean water
  • Battery and fuel cells
  • Organic farming
  • Forensic science for better justice delivery
  • Advanced polymeric materials andcomposites
  • Material science
  • Chemistry for affordable medicine
  • Policies on climate change
  • Applications of computer science for sustainable development
  • Electronics applications
  • Agricultural developments
  • Renewable energy
  • Endemic, pandemic of the new world
  • Polymer upcycling
  • Conceptual mathematics

Abstract Specification

Authors should submit an abstract not exceeding 300 words excluding figures or tables. All the accepted abstracts will be published in the conference proceedings.

Peer Review

The submitted abstracts will be peer - reviewed. The authors of the selected abstracts will be invited to present the paper at the conference.


Below are the conference topics but not limited to
  • Deep Learning
  • Neural Networks
  • Fuzzy Logic
  • Expert Systems
  • Computational Intelligence
  • Natural Language Processing
  • Data Mining
  • Human-Computer Interaction
  • Pattern Recognition
  • Image/Video Processing
  • Brain-Machine Interface
  • Segmentation Techniques
  • Augmented/Virtual Reality
  • Internet of Things
  • Smart Cities
  • Ambient Assisted Living
  • Smart Healthcare
  • Intelligent Transportation
  • Data Science
  • Sensor Networks
  • Affective Computing
  • Context-aware Pervasive Systems
  • Electrical Machines & Adjustable Speed Drives
  • Energy Saving and Compatibility of Electrical Machines & Drives
  • Measurements, Sensors, and Observing Techniques
  • Motion Control
  • Digital Signal Processing
  • Renewable and Reversible Energy Sources &Technologies
  • Telecommunication Technologies & Communication Systems
  • Control Theory and Application
  • Application of Hybrid Artificial Intelligence approaches for Hydraulic Problems
  • Artificial Neural Networks for Estimation of the Energy Consumption
  • Swarm Intelligence for Optimum Weight of the Structures
  • Genetic Programming for Large-Scale Civil Engineering
  • Application of Fuzzy Logic in Civil Engineering Problems
  • Optimization Model for Single- and Multi-Objective Solutions for Construction Management
  • Artificial intelligence for engineering design, analysis, and manufacturing
  • Machine learning and artificial intelligence for robotics
  • Material modeling and smart materials
  • Intelligent control and damage detection
  • Optimum design of mechanical systems
  • Automobile engineering -Self-driving, auto parking
  • Renewable Energy
  • Robotics
  • Mechatronics
  • 3D Printing
  • Biomechanics
  • 5G Antennas
  • Wearable Antennas
  • RFID Antennas and Systems
  • Mobile and PCS antennas
  • Broadband/ultra-wideband Antennas
  • MIMO Antennas and its Applications
  • 3D printed Antennas and Structures
  • The reflector and Reflect Array Antennas
  • Microstrip Antennas, Arrays, and Circuits
  • Analog, Digital & Mixed-Signal Design
  • Low-Power Design
  • MEMS, NEMS design & Technology
  • Device modeling and Process simulation
  • Thin film, Ultra-high-speed Transistors, HEMT/HBT
  • Artificial Intelligence (Process & Device)
  • Spintronics
  • Cyber-physical Systems
  • Signal Processing: Theory, Methods, and Applications
  • Hardware implementation for Signal Processing
  • Biomedical Imaging Technologies
  • Face recognition & Super-Resolution Imaging
  • Remote Sensing
  • Signal Processing for Smart Systems
  • Sparse Signal Processing
  • Data Mining in avionics systems
  • Fuzzy Logic in SHM
  • AR in Aircraft Maintenance
  • Expert Systems in Aircraft Maintenance
  • Digital Twin


Only original work should be submitted. The organizers are committed to follow IEEE guidelines on Plagiarism. Full paper in IEEE format should be submitted through online paper submission process (Easy chair submission system).

Easy Chair Link:

Manuscripts received through the Easy Chair online submission system will only be considered for review. If you are facing problems with online submission, please contact us

To prepare your manuscript follow the IEEE conference template available at:

The maximum page limit is six. However, the over-length manuscript may also be considered but up to a maximum of 8 pages manuscript only. In case of acceptance, the authors must pay over-length page additional charges (for two pages). There will be an over-length page fee of Rs. 2,000/page for Indian participants and $125 per page for the foreign participant. This payment is required at the time of registration.

All references must follow the IEEE format of referencing.

New authors can not be added or removed at any stage once the paper is submitted.

Instruction to Authors of Accepted and Camera-Ready Papers

CAMERA READY paper (on or before March 1, 2023)

REGISTRATION form Duly completed (on or before March 1, 2023)


STEP 1: Download the Camera-Ready Format for ATCON-1-ICAIA-2023.

Templates Download:

Template in Microsoft Word Format:

Template in LaTeX Format:
Authors are requested to follow the paper submission link on the website.

STEP 2: Use the IEEE PDF eXpress link below to check if the Camera-Ready paper is IEEE compliant.


  • First log in to
  • If you are a new user, then click on "New Users-Click Here" and proceed as instructed. Otherwise, you can continue directly.
  • Conference id is 57370X.
  • Enter your email id and password.
  • Click on "Create New Title".
  • Enter your Paper Title.
  • Click on "Submit File for Checking and Converting".
  • Upload your paper (Ensure that your paper is in IEEE format before uploading).
  • You will receive IEEE Xplore PDF-compatible version on your mentioned email id with a Paper_ID no.

Please send us the PDF of the Camera-Ready Copy generated by PDF eXpress only.

STEP 3: Please Rename your PDF as XXX_camerar.PDF where XXX is your easy chair paper ID.

STEP 4: Send a single zip file where XXX is Easy Chair Paper_Id at with the subject "Camera-Ready XXX" e.g., "Camera-Ready 151" containing the following files:

  • IEEE PDF Compliant Camera-Ready Paper (XXX_camerar.pdf)
  • Source File (XXX_camerar.DOC or XXX_camerar.DOCX)
  • Registration Form (XXX_regform.pdf)
  • Scanned Copy of E-receipt with Transaction (UTR) Number (XXX_.pdf)
  • Scanned Copy of IEEE Membership Card (If Applicable) (XXX_IEEE.pdf)
  • Scanned Copy of Student Identity Card (Full Time, If Applicable) (XXX_student.pdf)
  • A doc file that will include the "Response to comments" of the reviewers and how the comments are addressed in the revised paper.

For Poster Submission the Guideline will be issued soon.

  Guest of Honour

Prof. (Dr.) SABU THOMAS, D.Sc., Ph.D., FRSC, FEurASc
Mahatma Gandhi University, Kottayam, Kerala, India
Director, School of Energy Materials
Founder Director, International and Inter-University Centre for Nanoscience and Nanotechnology
Professor, School of Chemical Sciences
International and Inter-University Centre for Nanoscience and Nanotechnology
Chief Editor,Nano-Structures & Nano-Objects, Elsevier

  Keynote Lecture

Dr. Vijayakumar Chakkooth
Senior Scientist, Photosciences and Photonics
Chemical Sciences and Technology Division
CSIR- National Institute for interdisciplinary Science and Technology (NIIST)
Thiruvananthapuram, Kerala, India


  Important Dates

Last date of sending abstract November 30, 2022
Communication of accepted abstract December 2, 2022
Last date for sending full/revised abstract December 6, 2022
Last date of registration December 6, 2022
Conference Dates December 9-10, 2022

  Registration Fees

Particulars Registration Fees
Bachelor / Master Students ₹200 (INR)
Doctoral / Research Students ₹250 (INR)
Academicians ₹500 (INR)
Industry Experts ₹1000 (INR)
Foreign Nationals $20 (USD)
Last date for registration: December 5, 2022   Register Here



Mr. Abhay G. Chebbi, Pro-Chancellor, Alliance University

Dr. Anubha Singh, Vice-Chancellor, Alliance University

Dr. Techn. Siva Satya Srinivasa Murthy Chavali, Dean - Research, Alliance University

Dr. Reeba Korah, Professor and Interim Dean, Alliance College of Engineering & Design, Alliance University

Dr. Vipin Prasad, Head - Department of Science, Alliance University

Dr. Jyotishkumar Parameswaranpillai, Associate Professor, Department of Science, Alliance University

Dr. Chitrakara Hegde, Associate Professor, Department of Science, Alliance University

Dr. Chandni Pathak, Assistant Professor, Department of Science, Alliance University

Dr. Rashmi Sinha, Assistant Professor, Department of Science, Alliance University

Dr. Pravin Bhansali

Dr. Vivekananda Mishra

Dr. Jineesh A. G.

Dr. Suvarna Ramachandran

Dr. Priyanka Biswas

Dr. V. Thiruvengadam

Dr. Neetu Talreja

Dr. Jimin George

Prof. Sabu Thomas, Mahatma Gandhi University Kerala, India

Prof. Jacques Desbrieres, CNRS, France

Prof. Dr.-Ing. habil. Suchart, King Mongkut's University of Technology North Bangkok, Thailand

Prof. Geoffrey Mitchell, Polytechnic of Leiria, Portugal

Dr. Luc Averous, University of Strasbourg, France

Prof. Sarawut Rimdusit, Ph.D., Chulalongkorn University, Thailand

Prof. María J Sabater, Universitat Politècnica de València, Spain

Dr. Arun M. Isloor, NIT Karnataka, India

Dr. Azzuliani B. Supangat, Universiti Malaya, Malaysia

Dr. Rosa Anna Nastro, University of Parthenope of Naples, Italy

Prof. Shun-Wei, Ming Chi University of Technology, Taiwan

Dr. Maria P Nikolova, University of Ruse Angel, Kanchev Bulgaria

Prof. Chin-Che Tin, Auburn University, USA

Dr. Suryasarathi Bose, IISc, Bangalore, India

Dr. Kadhiravan Shanmuganathan, CSIR-National Chemical Laboratory, Pune, India

Dr. Radhakrishnan E. K., Mahatma Gandhi University, Kerala, India

Dr. Prasanth Raghavan, Cochin University of Science and Technology, Kochi, India

Prof. Ramesh C. Deka, Tezpur University, Tezpur, India

Dr. Jinu Jacob George, Cochin University of Science and Technology, Kochi, India

Dr. Sadhan K Ghosh, Jadavpur University, West Bengal, India

Dr. Usha Arcot, Alliance University, Bangalore, India

Dr. Aswathaman H. Christ College of Science & Management, Malur, India

Dr. Azzuliani B. Supangat, Universiti Malaya, Malaysia

Dr. Rosa Anna Nastro, University of Parthenope of Naples, Italy

Prof. Shun-Wei, Ming Chi University of Technology, Taiwan

Dr. Shekhar R., Alliance University, Bangalore, India

Dr. Vijesh A. M., Deka, Payyanur College, Kerala, India

Dr. Srilata Rao, Nitte Meenakshi Institute of Technology Bangalore, India

Markus Gahleitner, Ph.D., Senior Group Expert PP Borealis, Polyolefine GmbH, Austria

Guillermo R. Castro, Ph.D., Senior visiting Professor, Nanomedicine Nucleus, UFABC, SP, Brazil Senior Research Scientist, CONICET, Argentina

Prof. Sarawut Rimdusit, Ph.D., Head of Polymer Engineering Laboratory, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok 10330, Thailand

Prof. D.Sc. Mariana Buranelo Egea, Instituto Federal, Goiano - Campus Rio Verde, Brazil

Dr. Prasanth Raghavan HOD, Department of Polymer, Science and Rubber Technology, Cochin university of Science and Technology, Kochi, India

Dr. Nishar Hameed, Associate Professor, School of Engineering, Swinburne, University of Technology, Hawthorne, Victoria 3122, Australia


Dr. Jyotishkumar Parameswaranpillai / +91 99478 19360 |

Dr. Chitrakara Hegde / +91 98454 65420 |

Conference Venue

Alliance University
Central Campus
Chikkahagade Cross, Chandapura - Anekal Main Road, Bengaluru – 562 106, Karnataka, India

Email Address